Machines

Testing machine Instron 1362-DOLI.

Remote testing machine Instron 1362-DOLI.
Tests are performed at an improved remote machine. A frame of electro-mechanical testing machine Instron 1362 with a rigidity of 450kN/mm is used as a base. The maximal admissible load value is 100kN. The machine was improved and equipped with the following additional devices:
- three-zone furnace “MAYTEC” HTO-08 and a temperature maintenance device to record temperature changes during testing;
- high-temperature extensometer PMA-12/V7-1 with ceramic probes to perform instrumented tests in the temperature range from +20oС to +800oС;
- outside digital controller EDC 120 of “Doli” production;
- central processor with “Messphysik” software for programming testing conditions, acquisition and processing and testing data.

Instrumented impact-testing machine RКР-450

Instrumented impact-testing machine RКР-450 (Roel/Amsler, Germany). A hammer blade equipped with gages and software Impact Win и AVTOTEST allow registration of specimen fracture diagrams. These data are used to determine the dynamic yield strength, energy of damage generation and propagation and behavior in the upper shelf temperature range. The machine allows dynamic crack resistance characteristics to be determined.






Zwick 5113 facility

Zwick 5113 facility is used for compression, tensile, bending, relaxation, creep and low-cycle fatigue tests as well as for plotting Kic, Jic, JR curves (GOST 7855-84). Software AUTOTEST and ImpactWin is used to program the testing parameters, control testing and process the obtained results.
For each testing a diagram “loading-time” is plotted and the value of impact energy. The protocol of the experiment is made automatically. The testing technique corresponds to ISO-CD14556:2000(E).